Bulletin Board

Hello, I ma french ( ) and using recently VRTOOL to help the navigation(browsing) in VR, the frame(executive) " speeds(looks) of the sailboat " is not updated for information vitese sailboat, speed wind and angle in the wind; only information Lat ., Length ., the hour, the course(cape), the classification(ranking) and the veil(sail) is informed.
Anybody knows why ?
Thank you in advance,

goldyVRT wrote:Anybody knows why ?

not sure. But make sure you have wind grids loaded for the regatta area.

thanks, omar,
apparently confirm information downloaded (obtained by copying the address taken from the cache), the information is not complete for my boat only :

<result>
<state>OK</state>
<user id_user="1930637" date="2012-11-27 04:25:24" dateGMT="2012-11-27 03:25:24" clientVersion="13" windDate="20121126235855">
<nb_creditsMP>60</nb_creditsMP>
<position date="2012-11-27 04:17:02">
<latitude>1.25491919434</latitude>
<longitude>-11.9553259838</longitude>
<voile>8</voile>
<cap>114</cap>
<distancerestante>21111.3</distancerestante>
<distanceparcourue>3563.71</distanceparcourue>
<option_voiles_pro>1</option_voiles_pro>
<classement>79010</classement>
<checkpoint>3</checkpoint>
<diffClassement>0</diffClassement>
</position>
<amis>
<boat id_user="293815">
<longitude>-18.4803743838</longitude>
<latitude>-10.7765017037</latitude>
<voile>8</voile>
<vitesse>12.4085</vitesse>
<wind_speed>15.1188</wind_speed>
<wind_angle>69</wind_angle>
<cap>179</cap>
<distancerestante>20853.9</distancerestante>
<distanceparcourue>4339.16</distanceparcourue>
<classement>19688</classement>
</boat>

hi ,
I've exactly the same problem for my boat ( and not for friends) despite wind grids are loaded for the local map ....
if everyone have an idea ......?

thanks in advance.

jeanliso

First of all, thanks Omar for all the works you done.
Following my previous post,I searched a solution for my problem and observed GetUser checksum changes sometimes (change by VR / MP I suppose ) and old checksum don't works for name, speed of my boat, wind speed and angle.
The (bad) solution I found is a new copy-paste of URL by using httpfox ...
It now works very well, ... probably until next change of checksum...
Bonne regate pour goldyVRT !

tschelli wrote:There are two kinds of GetUser calls - one when I logon (without auto=1 parameter) and one when I reload (this one has auto=1 parameter). I use the one without auto=1 - it has boatname and all other stuff and the track is automatically updated - it works just perfect! regards tschelli

if you use tschelli's suggestion above, you don't have to change the URL

Super !! J'ai compris.
Et encore grand merci .

regards

Omar thank you for this great software
Jeanliso thank you for your encouragement and congratulations if you understand.
I thought I understood, but ultimately no, it does not work!
But with automatic translation it may be normal.

To not have the AUTO = 1, it must check the box "updated in" and update by hand?

If you put auto = 0 in the address field GetUser, it does not work, the checksum is wrong, of course.

Bonjour goldy,
sur l'interface VRTool, il faut bien cocher la case "mise à jour auto dans"
mais sur l'interface VirtualRegatta, il ne faut faire (si on en a besoin) que des rafraichissements manuels et ne pas activer le rafraichissement auto toute les 10 mn.
Tu auras ainsi un checksum sans le "auto=1" . (recharge ton checksum avec httpfox si nécessaire) et tout sera OK
Dernière chose, il ne faut pas bidouiller le checksum en enlevant "auto = 1" ou en mettant auto = 0, ca ne marchera pas !!!

(J'ai trouvé toutes ces précisions sur le blog du Grand Dic)

Bonne nav à toi !

Merci, jeanliso,
ça marche !
Bonne navigation, à toi aussi.
Et encore bravo à Omar, Paco et les autres.